Showing posts with label jib sheet track. Show all posts
Showing posts with label jib sheet track. Show all posts

Friday, 2 March 2012

Update on the jib sheet track

After much head scratching and an attempt to fill the holes with epoxy filler with a view to re drilling and then screwing the fixings back in with a hope that a new thread would be cut. The problem with that solution was that you would never be able to fill the void with epoxy. The screw fixings were only fixed to the thickness of GRP and not for the full length of the machine screws. I then explored a suggestion made by Stewart Brown of Churchouse Boats to use a plug fixing. A search of the racks at B&Q failed to find a suitable plastic plug. I then made a search of my own stock and found a rawplug type fixing made by Fischer.


I found that these would accept the 5mm machine screw and that they would need a 6mm hole. So the existing 5mm hole needed to be drilled out by 1mm. This I felt was not too a drastic alteration. When the plugs were fitted they were a nice tight fit as I did not want the plug to rotate in the hole.


I used epoxy with filler to glue the track down and the machine screws tightened up well. The track now feels quite firm and I hope is now secure. I will let you know if there are any problems.




Saturday, 25 February 2012

Jib Sheets

Took the cover off the boat as the weather was fine and warm.

The jamb cleat for the jib sheets was in efficient and had the annoying habit of un jambing at the most inconvenient time. So I have adopted the same solution as for the mizzen sheet and installed a Barton Cam Cleat. I have reduced the number of holes I had to drill by utilizing one of the existing ones and turning the cam cleat to the right angle. The one remaining hole I plan to fill with a bolt.


The other problem which was identified on the last trip out was that the starboard jib sheet track was loose at the forward end. When I removed the bolt I found that it was screwed directly into the GRP and that the thread had been ripped out. I also found that the second and third screw were loose. I have removed the screws and looking for a solution. I have not as yet removed the track completely as the remaining screws and bolts are fixed tight and they screw into a portion of the deck over a buoyancy chamber. The loose screws are over a locker in the bridge deck which is accessible from the cabin. I am looking for a solution, considering a plug of some kind or to drill right through into the locker and secure with a bolt with penny washers. I will keep you posted.