October sail.

Thursday 4th and 5th October 2012

The sailing season has come to an end. The season has a whole has been a poor one for me with a combination of poor weather and other commitments. This final  trip was a cruise in company with the South Coast Sailing Group. This group is an informal group of small boat enthusiasts who in the main sail Drascombes.

The plan was to sail as an informal group with boats coming from Chichester, Warsash and Keyhaven. The intial destination was in actual fact Keyhaven to take advantage of a Curry night at the Keyahven Yacht Club.

To start at the beginning I planned to come down to my yacht club a day earlier in order to get the boat into the water and just generally be with the boat. I arrived at the Club to find that the thieves had visited the club also in the previous week. Talking to other club members I found that at least two outboard motors had been stolen. One from a boat on a mooring and the other from a boat in the pound. My boat had been tampered with but nothing stolen. I had taken the precaution of removing the plastic cover to the outboard which had rendered it less sale-able.

Launched the boat and moored it on the pontoon. The forecast for that night was not good with a F8-9 gale predicted to come through at about 0200 hours which just by chance coincided with HW. At 0200 hours I was awoken by the violent movement of the boat pulling against it's warps. A neighboring boats sail become loose and flapped making it rather difficult to sleep.I looked out and found it raining heavily and with a mist of spray over the creek. I did not get to sleep until about 0400 when the tide fell again.

The next morning a number of my sailing comrades arrived and after lunch in the Social Club we set sail for Keyhaven. The wind was blowing F4-5 from the West and progress was slow to our destination. I put a reef into the main and progress to windward with a wet going tide. I was slowly overtaken by the fleet of Drascombes. I put this down to my caution in keeping the reef in longer than the others and I was probably not as efficient in sailing to windward. I must really put those tell tales on the sails that were bought for me as a birthday present from my son. The weather was poor with heavy rain soaking me and water was streaming off the sails.

At about 1900 hours I reached a point off the Isle of Wight opposite Lymington. The wind strength had fallen. I had taken the reef out of the mainsail some hours before and all sight of my comrades had disappeared. The visibility was not good and the mainland was just disappearing in the gloom. I decided it was time to use the engine as it would not be long before dusk. I furled the sails and I motored at about 7 knots to Keyhaven.

I arrived about 10 minutes after two Longboat Cruisers and I moored on the outside of a raft of Drascombes. I put the cockpit tent up and I retreated to the Yacht Club for my Curry and to dry out. I have found that however efficient your waterproofs are that water seeeps down your neck.

Saturday 6th October

The wind direction had changed to a ENE F3 and so we would see what the sailing prospects were going to be. It had been a wet night with about a gallon of rain water in the cockpit. Water was just over the grating. The sunshine was out with a little cloud. We left at about 0900 hours in order to get the east going tide.

I was the first away and anxious to make better progress in the fleet.

Se sail out of the harbour and past all the moored craft in the long approach. Set the sopping wet mainsail and we set off at a steady 5 knots. I managed a long reach but could not manage a course straight to Cowes. The wind increasingly came from the East and I had to put in a couple of tacks  to reach the Prince Consort buoy. The first turn was at Thorness Bay. Even a turn at the entrance of the Beaulieu river was not enough and had to put in another  tack to reach the Prince Consort. I then furled the sails and motored up the Medina River to Newport town quay.

Sunday 7th October

Sunday morning  was spent in Newport listening to the church bells and reading the Sunday paper. The flotilla was disbanding to various ports as the weekend had effectively come to an end. I decided with a couple of others to extend the weekend a little bit and go on a diversion to Newtown creek. The wind was in the North blowing at a F3. the tide was in our favour and we could get an early west going tide by keeping close to the coast at Egypt point. The sun was shining and I motored slowly the Medina River. Past the Vetus wind turbine factory and the Folly Inn pub.

I set the sails behind the breakwater on the eastern side of the entrance of the Medina River and turned to port to the West. The sail to Newtown was uneventful. Even tried fishing with my new paravane but only caught some seaweed. Anchored at the entrance to Western Haven with another Drascomber. The other two had decided to head east back to their home port of Chichester.

Monday 8th October

I awoke to find my fellow Drascomber was awake and breakfasted and was ready to set sail. He was anxious to get back to Warsash which is accessible at all states of tides. I had to wait for HW at Ashlet which was approximately at 11:30 hours. The weather was heavily overcast with restrictd visibility down to a mile as I could see the hill on the far side of the creek. The weather forecast gave vis of about half a mile. I decided to sail and rely on the chart plotter and my knowledge of the Solent. The wind was from the NW F3. I set sail at about 11:30 and made good progress in a single beat to Lepe. The wind increased at approx a F5 and so I put in a reef in the main. I then made slow progress to wind ward up the coast towards Calshot. The wind had appeared to increase to the North and so progress was made between the shore and the traffic separation zone. I was anxious not to enter the zone and meet any large shipping. I managed to keep sight of the shore but the visibility had come down to about half a mile. The chart plotter was valuable as it allowed me to keep an exact position of where I was. I know one should not rely on electronic aids but sailing single handed it is not really possible to do proper navigation. I used the depth sounder as well to gauge how close to the shore I could go. The sea state was smooth and the wind strenth had now decreased and I shook the reef out of the sail. I slowly made progress probably in about a dozen tacks and I recognized the features  on the shore as the old barracks and hangers of the seaplane base. I grounded slightly on the spit and quickly raised the plate and sailed out to seaward. I rounded the spit and the visibility lifted and I could sail directly up Southampton Water and past the Coastguard tower. I could now see all the way to the top of Southampton Water. I arrived back at my home port and hauled out. That trip was one of the most challenging and the first time I had encountered poor visibility. There was no safety net of sailing in company with other boats and so it gave me some degree of satisfaction.

Day sail

Two hours sailing on Southampton water after a 2 hour drive from home. Beautiful day with fair winds. Makes up for the poor weather earlier in the year.

The Non Poole Cruise

Thursday 12th July 2012

The objective was to cruise with a group of other Drascombes to Poole Harbour and enjoy a few days in the harbour before returning to the Solent. This objective was thwarted by a lack of suitable weather. The pattern seemed to be for a succession of depressions to come in from the Atlantic and so setting up a persistent pattern of westerly prevailing winds of F4 to F7 with heavy rain.

Anyway we arrived the previous day on Wednesday 11th July and launched our boats at Ashlett Sailing Club with a view to catching an early tide at 07:15 hours the following day. The next day a group of 5 boats were assembled and ready to go. The wind was about F3-4 from the West and so we decided to head down the Western Solent towards Keyhaven. The plan was to go to Newtown Creek for lunch.


Photo courtesy of Andy Cooper

The trip to Newtown was a beat to windward and was achieved in about 5 or 6 tacks. I found it was easier to keep to the island side as the sea was calmer and a little more sheltered. The sea was smoother and it was easier to achieve a more upwind distance. If the sea was rougher you had to bear away to keep up a speed to force your way through the waves. The wind strength was such that I was able to set full main, foresail and mizzen. I arrived at about 1400 hours and joined the rest of the group in a raft in the Shalfleet arm of the creek. The weather had been dry and occasional sunshine.


Photo courtesy of Andy Cooper

The agreed plan was to wait for the tide to turn to the East so that any wind against tide would be minimized and make for Keyhaven where we knew that other Drascombers were moored. As we waited for the tide it started to rain heavily and the wind strength increased. I was glad of my spray hood and I was able to boil a kettle and make some soup. I later got my head down in my berth partly dressed in my waterproofs. At about 1700 hours there was movement above and my compatriots were getting ready to go to Keyhaven. It became quickly apparent that we were not going to sail and that it was going to be wise to get there as soon as possible. A group of us which consisted of two Coasters, Longboat Cruiser, Drifter 22 and a Gig motored to Keyhaven initally keeping close to the island to get as much as shelter as possible. The wind speed had increased to about 35 knots F7, heavy rain and visibility of about a mile. The sea state                                                                                                                                                                                          was not too bad and the waves must have been about 1 metre. The coaster took sea in its stride and did not slam down. Observing another Coaster the fine bow cut through the sea. I did establich later the Drifter 22 with a flatter and wider bottom did slam a little into the sea. My 5HP Honda proved more that adequate and was not backed by the seaway. I was able to keep up with everybody else who had larger motors.

I have now found out that the Honda  BF5  does not have the option of a finer pitched prop which would give more grip in the water and be able to push through heavier seas. The BF5 is supplied with a standard prop suitable for multi purpose use. A saildrive prop is only available on the Honda 8HP upwards. If I was looking for a new engine I would certainly consider this option. But I do not have any cause to critisce the performance of the BF5 yet.

We passed Yarmouth on the port bow and was tempted to take a left turn. But I was not going to make a unilateral decision. We pressed on to our objective of Keyhaven. I had never been out in such wet and windy conditions before on my Drascombe. The boat gave me confidence. The rain and spray soaked me and I watched the spray blowing over the bow and sprayhood on "Gadfly". A Longboat Cruiser came close to colliding with me as the lone helmsman reached down into his cockpit to retrieve something. I caught sight of the boat in the corner of my eye. My view was restricted due to the hood of my waterproof. I quickly did a 360 degree turn which put some distance between him and me.

We turned to starboard to cross to Keyhaven and for a few minutes we got the full force of the wind as we passed into the wind blowing through the narrows. We entered the entrance of Keyhaven and although the sea did smooth out a little the wind strength increased. In the river as we turned to port and the wind blew onto my beam the boat leaned over at a slight angle although we were under bare poles. I increased the throttle slightly to maintain steerage through the trot moorings. We entered an area of shelter behind the harbour wall. We circled the small sheltered area as we waited in turn to moor against the harbour wall. I moored against a Longboat cruiser with the bow into the wind.

As somebody joked "That was character building"


Photo courtesy of Andy Cooper

Friday 13th July

It was agreed that it would be unwise to cross Chistchurch Bay to Poole with the westerly F5-7. The prospect of motoring into a heavy sea was just out of the question. we therefore decided to sail to Cowes which would have been with the wind and the tide.

We left at about 0900hours and it was a run on foresail alone. I averaged about 5-6 knots and we reached Cowes at about 1400hours.We sailed up the Medina River in sunshine, past the Folly Inn and into new waters for me. The river became quite shallow and we eventually moored on the pontoons at Newport which is close to the centre of town.


Photo courtesy of Andy Cooper

J Class yacht in the Solent

Whilst sailing to Cowes I came across this beautiful yacht. I have not been able to identify it. It sailed past with such power and beauty.

Chichester Rally 4th – 7th May 2012

Chichester Rally 4th – 7th May 2012

They're a hardy lot Drascombers. This was proved by the large attendance figures at this year's
Chichester Rally. Held over the early bank holiday weekend in May and based in Chichester Marina, (1 Drifter 22, 3 original Drifters, 15 Coasters, 1 Gig, 2 Long Boat Cruisers, 1 Long Boat, 5 Luggers, 1 Scaffie and, er… hmm, 1 Cornish Shrimper) - 30 boats, in total, took part with over 50 skippers, crew and visitors attending, with some new faces and new boats.

Passage through the submarine barrier at Portsmouth.

Feeder cruise en route Ashlett 

We left Ashlett Creek at 1115 hours on the Thursday 3rd May. We had to get past the last of the west going tide before the tide turned in out favour at about 1400 hours. The wind was predicted to be Force 3-4 variable. When we entered Southampton Water the wind was blowing at about 12 kts from the NE and so we were able to attain a speed of about 5kts. But when we came into the lee of the land the wind speed dropped and so did our speed. We reached about Lee on Solent when one by one we turned our motors on. We congregated at Gilkicker point into a bunch in order to negotiate the busy sea lane outside Portsmouth Harbour. We passed without incident and the only ferry passed us by well astern. The rest of the journey was plain sailing and we entered Chichester Harbour at the last of the ebb.

we joined the rest of the fleet who arrived over the next 2 days.

Feeder cruise arriving at and in Chichester Marina Lock Photos - Andy Cooper
Friday, itself, was grey, cloudy and cold, with a few showers but undeterred boats were launched and tents erected, not only on boats but also in a field adjacent to the marina.
A welcome dinner was held in Chichester Yacht Club and Roger and Anita Whiffen shared their Golden Wedding celebrations with us, providing a lovely cake.
Saturday’s weather was more of the same and the original plan for a shakedown sail followed by a rendezvous in Bosham were amended once out on the water with many of the fleet taking up the offer of food, drink and, most of all, warm shelter at Dell Quay Sailing Club.
It remained cloudy and grey, but largely dry for the remainder of the day and in spite of the
elements the evening saw the barbeque in full swing, using the now familiar ladder rack system.
Stewart Brown presented the Churchouse Boats trophy to Roger and Anita Whiffen in recognition of their long association, over 30 years, and boundless enthusiasm for Drascombing exemplifying the spirit of the Association.

The Ladder Rack BBQ Photo – Andy Cooper

Roger and Anita with Stewart Brown presenting the Churchouse Boats Trophy Photo – Andy Cooper
Happy Anniversary – Roger and Anita Photo – Andy Cooper
John Christie, who had travelled down for the day, then made a speech and presentation of the Hans Vandersmissen award to Jim Hopwood.
The band played on and the singing and merriment went on until the barbeques finally stopped giving out any heat. Several different parties started on various boats and the carousing continued until the early hours. Indeed I was quite surprised to see some faces at the briefing the next morning...
Sunday was also grey, cloudy and cold, but many boats went out, including the Southampton fleet who headed to Cowes to catch the tide into Ashlett the following day. Once again for those remaining in the harbour, Dell Quay Sailing Club proved a useful stop over. Others took the opportunity to walk in the surrounding countryside.
During the afternoon there was a steady trickle of departures as skippers and crew decided to beat the Bank Holiday traffic.
Monday started with rain but it soon dried up and the sun came out and it was warm with a good breeze, making it the best day of recent weeks. Two stalwart Lugger skippers, Robin Carter and Ross Archer, together with their crews, explored Bosham quay and adjacent roads that were under water due to the height of the tide.
By 6.00 pm all the last of the fleet had departed on the journey home.
The weather had been poor and could easily have put a huge dampener on the whole event, but the people who came along all pulled together to make it a very satisfying and enjoyable event so my thanks to all of them and, next year, I'll book the weather.

Chichester cathedral

Stained glass window by Marc Chagall

Canvas pockets

An addition to the furniture of the boat. The last winter produced a lot of mold as a result of the poor quality tarpaulin I had over the boat. Mould cover the whole of the deck and in particular the inside of the boat. The previous canvas pockets were black with mold and not really suitable for further use.

My wife and I decided to make a custom made version which would fit on the back of the cabin wall to the left of the hatchway. The inset at the top of the pockets will fit around the back of my Garmin 451 chartplotter. The previous version over and therefore did not hang very well. There is sufficient length for them to finish above the locker entrance under the bridge deck.

These pockets are very useful to keep small things to hand whilst you are in the cockpit or in the cabin.

The canvas is uncoated acrylic canvas from PointNorth Fabrics in Anglesy. . http://www.profabrics.co.uk/ The canvas was sewn on an ordinary domestic sewing machine. My wife will take orders if you want a simialer thing made.

Wood restoration

The time had come to restore the woodwork to it's former glory. The previous owner had painted all of the woodwork with an external wood stain which I suspected was something like "Sandolin". This wood stain did provide with a robust finish and was quite resistant to knocks and abrasions. I have known some owners  to have used this finish with the argument that Drascombes are working boats and that the finish is not a huge importance.

I had decided against this finish because in places such as the lower gun wall it was pealing off and looking rather unattractive. The problem is that whatever paint finish you use it has difficulty in sticking to the oily surface of the wood. I suspect that the wood parts on my boat are made from Iroko. Teak has long since become too expensive and rare to be used on Drascombes. Speaking to Bob Brown of Honnour Marine even Iroko is becoming difficult to obtain in terms of cost and in sufficient lengths to complete the gunwale in 2 lengths. He was looking for an alternative. My previous boat a 1972 Lugger was finished in teak  which did look rather nice.

I decided to use Burges woodstain as  alternative as it does have a good performance of actually sticking to the oily wood. It may not have such a resistance to abrasion but it is used by the present day manufactures of Drascombes. The first problem is how to remove the old varnish. I decided to use paint and varnish stripper as previous use of a hot air gun resulted in damage to the timber through abrasion and burning. I used a cheap product and not the strong brands as I did not wish to damage the GRP if there were any splashes. I used masking tape to protest as much of the surrounding area as possible.  The stripper worked well but still required a lot of elbow grease in scraping off the coating. I used a furniture scraper. I found that 2 applications of stripper were needed to remove the wood stain. Finally washing off with fresh water. I sanded to remove the last traces of the old varnish and then painted with three coats of Burgess.

Forestay Rigging Repair

At the end of last season I found that the top of the roller reefing spar was in need of repair. The plastic collar in the top of the aluminium spar had become detached and the spar was rattling on the wire forestay. I tried to repair it myself with glue and only succeeded in gluing the fore stay to the plastic collar which had been fixed to the alloy spar. In other words I had made a real mess of the forestay. I managed to drill the plastic collar out of the alloy spar but as result needed to replace the collar.



I came to the opinion that I could not repair this myself as I did not have the tools to swage the terminals. The cheapest swaging tool I could find was £75. So I decided to employ the skills of a professional rigger. I made enquiries in local Chandlers and found that a lot of local riggers had gone out of business. The South Coast where there are a greater number of yachts is well endowed riggers.

A suggestion was made to seek out a rigger who works in the Underfall Yard in the Bristol Docks. I found Dennis Platten and his apprentice Jay running an enterprise called "Traditional Rigging"

http://www.underfallboatyard.co.uk/skills.htm

Underfall Yard  is a traditional boatyard which dates back to the time when the River Avon was made into a floating harbour with a system of locks and sluices. Brunel later improved the docks with an underfall sluice system to prevent the docks from silting up. The above website gives a lot more information about the history of the docks. The Underfall Yard is a hive of activity building and restoring traditional boats.

Jay repaired my fore stay and replaced the plastic coller at the top of the spar. I have now installed back on the boat and all works well.

Honda BF5 service

This is not a definitive guide to servicing an outboard but only an account of my experiences. If you have any doubts or queries please consult a qualified Honda service engineer. No liability will be accepted for anything contained in this account.

I decided this year to extend my skills and service the outboard myself. I purchased on E-Bay a Honda Service kit without oil at a cost of £28.75 plus postage of £2.70 from a company called Marine Tech based in Norwich. Delivery was prompt and a small brown cardboard box arrived in the Royal Mail post. Marine Tech in their E-Bay ad offered to send an E-Mail with a copy of the workshop manual. This proved to be very useful as it gave simple explanations as to how to carry out the service. No special tools were required and the only spanner I used was a 10mm socket. A large flat tipped screwdriver was also useful to undo the gearbox filler and drainage screws.

I first of all drained the engine oil so that I would not have the problem of engine oil getting into parts of engine whilst tipping the motor about.

The biggest job was the renewal of the water pump which required the dismantling of the gearbox from the outboard leg.The first task was to undo the gear connecting rod which was accessed through a rubber plug in the side of the leg. The gearbox was secured by two bolts which came undone easily and the gearbox dropped easily off the outboard leg. I think I was lucky in that the motor had previously been well maintained and the bolts were lubricated and not seized. The next task was to dismantle the water pump housing and pull off the gearbox drive shaft. The shaft was loose and slightly spring loaded so that it would connect with the drive shaft in the leg. I removed the rubber pump vane which appeared to be in good condition after two seasons although the rubber vanes had adopted the shape of the pump housing and some of the arms were permanently bent.. I have been told that lack of use can also be a disadvantage to the life of pump impellers. The received thinking is that they should be replaced at the annual service. I then reassembled the impeller and the housing ensuring that the impeller vanes are pointing away from the direction of rotation. I replaced the gaskets with ones from the service kit. The manual gives torque settings for all the bolts and I took care to make sure they were tightened correctly.

Whilst I had the gearbox off the motor I took the opportunity to remove the propeller and take off some the worst burrs with a file. Grease the shaft and replace the prop and renew with the supplied split pin. I then drained the gearbox oil and refilled.

I apolgise for the lack of photographs but the next task was the most difficult. I laid the motor on it's side on the work bench with the aim of refitting the gearbox onto leg. There are three items which you need to connect all at once and they are the water feed pipe to the engine, the drive shaft and the gearbox connecting rod. The first thing to do is to ensure that the square drive shaft is aligned with the square socket of the drive shaft. I became concerned when the drive shaft dropped out of the leg. The upper end is a splined shaft which mates with motor at the top end of the shaft. I managed to reconnect the shaft with the motor unseen by carefully pushing the shaft up and locating the splined shaft of the motor. After about 15minutes of fiddling the gearbox and the 3 components slid together. Turning the prop rotated the flywheel and so they were properly connected. The sealing ring of the water feed pipe was properly in place. I tightened the gearbox linkage and ensured that the correct amount of travel was in place using a micrometer.

The next task was to move to the top of the engine and check the valve gap settings. Removed the spark plug. In line with the manual the valve gaps were in tolerance. I had removed the cover taking care not to break the gasket as no replacement was in the kit.

Replaced the spark plug wit a new one from the kit.

A gasket for the thermostat housing was included in the kit but no thermostat. There was little explanation as to why it needed to be checked other that how to check that it was operating properly. I removed the cover and got a bit of a shock. The exterior of the engine was in good condition as you can see. The removal of the cover revealed a corroded thermostat with accumulation of sale, corrosion and weed. The thermostat itself was in the open position and so was defective. I had not noticed that the engine was slow to warm up. This exercise did emphasize the value of flushing the motor at every opportunity with fresh water. A new thermostat cost £23.40 from a local chandlery.

I then greased the points as described in the manual.

Tested the motor today. good healthy flow from the tell tale, forward and reverse work. All in order. I have gained a greater understanding of the workings of the motor.

Update on the jib sheet track

After much head scratching and an attempt to fill the holes with epoxy filler with a view to re drilling and then screwing the fixings back in with a hope that a new thread would be cut. The problem with that solution was that you would never be able to fill the void with epoxy. The screw fixings were only fixed to the thickness of GRP and not for the full length of the machine screws. I then explored a suggestion made by Stewart Brown of Churchouse Boats to use a plug fixing. A search of the racks at B&Q failed to find a suitable plastic plug. I then made a search of my own stock and found a rawplug type fixing made by Fischer.

I found that these would accept the 5mm machine screw and that they would need a 6mm hole. So the existing 5mm hole needed to be drilled out by 1mm. This I felt was not too a drastic alteration. When the plugs were fitted they were a nice tight fit as I did not want the plug to rotate in the hole.

I used epoxy with filler to glue the track down and the machine screws tightened up well. The track now feels quite firm and I hope is now secure. I will let you know if there are any problems.

Jib Sheets

Took the cover off the boat as the weather was fine and warm.

The jamb cleat for the jib sheets was in efficient and had the annoying habit of un jambing at the most inconvenient time. So I have adopted the same solution as for the mizzen sheet and installed a Barton Cam Cleat. I have reduced the number of holes I had to drill by utilizing one of the existing ones and turning the cam cleat to the right angle. The one remaining hole I plan to fill with a bolt.

The other problem which was identified on the last trip out was that the starboard jib sheet track was loose at the forward end. When I removed the bolt I found that it was screwed directly into the GRP and that the thread had been ripped out. I also found that the second and third screw were loose. I have removed the screws and looking for a solution. I have not as yet removed the track completely as the remaining screws and bolts are fixed tight and they screw into a portion of the deck over a buoyancy chamber. The loose screws are over a locker in the bridge deck which is accessible from the cabin. I am looking for a solution, considering a plug of some kind or to drill right through into the locker and secure with a bolt with penny washers. I will keep you posted.